Joubert

Furniture Technologies

 

A journey to the heart of plywood

The day begins early, after a good coffee and a journey through the French region of the Charante. We are here to visit Joubert Plywood, a company specialised in producing poplar and okoume plywood.

The group is a family owned concern, currently run by the third generation, with three production sites, one of which in Port-Gentil (Gabon), one in Saint-Jean-d’Angély and the third, which is the one we visited, in Eliots, north-east of Angoulême, where a Celaschi panel squaring line has been fully operational for a few years.

 

Before it reaches the Celaschi line, the wood is transformed in plywood.

“We retrieve the unfinished sections of poplar, which we cut lengthwise”, explains Laurent Marty, the Industrial Manager. “We then pass them through a short wood peeling lathe that can treat wood up to 2.7 metres in length [longer sections, up to 6 metres, are peeled at the Saint-Jean-d'Angély site, editor’s note]. They are then dried with a new system purchased in 2016, which is 30 metres long and 6.20 metres wide”. After the peeling, the poplar sheets are thoroughly checked. If any break, the strips are sent to the joining laboratory: “where they are processed to create intact sheets”, continues Laurent Marty. “In particular they are straightened and re-assembled with the application of a strip of glue”.

Once the dimensions have been programmed, the panels are cut along the longer side, whilst the scrap is unloaded laterally and milled. The panels are then transferred with feed pistons to ensure the squaring.

“This custom transfer system has been developed thanks to a close collaboration between SCM and our design office”, explains Laurent Marty. “Since the machine has been installed we are very happy with the machining results”.   

The second panel squaring line machines the short side and the scrap is collected and recycled as fuel for the boiler. The panels are then fully finished and ready to be shipped in France and worldwide. Joubert Plywood exports 70% of its production, in particular to the Netherlands, which is the group’s main market.

 

Text by the magazine Bois Mag

Joubert (France)

European plywood manufacturer

www.joubert-group.com

Request information

Fill out the online form to be contacted by a salesperson

 

gdpr::wood-privacy_a

gdpr::wood-privacy_b

gdpr::wood-privacy_c

form-disclaimer

Related products

Fiber Cement Squaring Machine Celaschi P60 - SCM Group

celaschi p60

Thanks to the consolidated experience and continuous development, celaschi p60 is double-end tenoner customizable according to specific needs. Its reliable mechanics, motors power and electronic management of the different devices make celaschi p60...