Ilar Verniciature

Technologies for surface treatment

 

TRADITION AND INNOVATION - THE 7-AXIS ROBOT 

Report after report, the “Door and Window System” seeks to photograph an overview of virtuous companies that provide constantly high and homogeneous quality to closure and shading systems produced and painted in Italy. The latest innovation offered by a subcontractor with a great entrepreneurial capacity.

We are back at the Ilar Verniciature plant in Chiari, Brescia, this time at the suggestion of Superfici (SCM Group), the famous producer of painting machines located in Monza and represented during our visit by Alfredo Zanconi, who accompanied us in a tour which was guided by Ilar Verniciature's owner, Angelo Ghilardi, and his daughter, Ilaria, who gave the company its name and who manages with extraordinary expertise the tinting machine to obtain the colour charts and samples. That of Ilaria Ghilardi is an ability that is mostly instinctive – to successfully create perfect colours without even needing to use tintometric technology: simply incredible. Let's begin with Ilaria and "her colours”, because right from the start of our interview with her and her father we realized that the “synergy” between the Ghilardis is the key to their success.

We already understood years ago that Angelo Ghilardi was natural-born entrepreneur, who invests rather than speculates, though of course never loses sight of Ilar's “accounts”. We have already noted, in these pages, how satisfying it is to meet again a company that like many others has had to deal with the years of economic crisis yet has come out unharmed, even stronger, thanks to a decision to make itself stand out in the marketplace, just when other companies were closing down. It takes courage, careful risk assessment and, of course, a tradition of fair trade practices for a company to earn a reputation of reliability in dealing with suppliers, customers and, if needed, credit institutions. This is the case with Ilar: “Yesterday,” Angelo Ghilardi told us with confidentiality during a quiet moment of our visit, hardly hiding his pride, “my boys, who I welcome and train, went home with their full salary, as they should of course. We all take it for granted, but how many times this does not happen? Today, a lot...”

Ilar Verniciature was founded in 1998. We had our first meeting a few years later, during the early stages of the economic crisis. We feared therefore that the economic situation might have affected also our friends from Chiari, despite the fact that our first visit had made us understand clearly what Angelo Ghilardi was made of. However, from experience we knew that though this company had a number of reliable clients, it might also have become a victim of the general market crisis, and so we embarked on our visit with moderate expectations.
Our expectations were based, however, only on what we had seen first-hand: a plant that was quite impressive already then, with a good level of automation demonstrated by painting reciprocators, the use of water-soluble paints from a leading brand (ICA from Civitanova Marche, still an Ilar supplier), the well-trained human resources, and other aspects. The necessary elements for success had been there, therefore, and our second visit has indeed confirmed it.

 

We are welcomed by Angelo and Ilaria Ghilardi, and our attention is immediately drawn to a robot (which replaced the reciprocators) set in the painting department directly in front of the plant gate, a sort of a welcoming figure as well as trade mark of a company with its face turned to the future. It is a fully autonomous 7-axis anthropomorphic robot that treats door and window frames hung on ninety hangers of a moving system over a dual-rail conveyor. The seventh robot axis is that of the automatic spraying gun, which can reach with absolute precision every hidden corner of the workpiece. The dual-rail system ensures the absolute stability of the hanging workpiece, which appears firmly stable with no oscillation whatsoever to the robot, ready in the best conditions to receive the coating product, be it the primer or the final coating.

The quality and service provided to clients by Ilar are the foundations of its success, which is made evident by the number of painting jobs entrusted to it by the majority of carpentry shops located around it over an area that spans dozens of kilometres. We all know quite well the worth of a word of mouth, and indeed in this case a single word would be enough to characterise the work of our Brescia-based company: "reliability” – which goes along with a business strategy that calls for continuous improvement, not required but smartly pursued by Angelo Ghilardi, who told us that, “Yes, when we met for the first time, I was already ahead in my sector. This is not bragging, you yourself noted it at the time. But if you stop developing, others will soon close the gap. It is vital, then, to always be one step ahead of the competition.”

“The robot, of course, is a huge step ahead. As it is fully autonomous, I can run and control it even from home at any time. It allows me to achieve a constantly high and homogeneous quality, with which I always ‘sign’ my painting jobs and which is rewarded by the loyalty of sixty clients. Prompt service is part of it, too. If necessary, we also restore damaged frames, using an outside service we trust. We must always keep an eye out to see what is happening around us, and keep ourselves informed about everything. This is the only way you can choose – after having considered all the possible alternatives – which is the best solution to meet your needs, as I had done prior to choosing the SCM Superfici robot.”

Ilar specialises in lacquered doors and windows, also two-tone coating which is a current trend, managing thanks to the robot, as mentioned before, up to ten different colours a day. The automatic colour change is performed by the robot as well. Obviously, by following a computer programme, selected for each type of work cycle, the robot can simultaneously paint door and window frames with different colours and periodically rinse the nozzles in the machine cleaning system, while a ‘martyr hanger’ – as Alfredo Zanconi of SCM Superfici fittingly calls it – divides one group of workpieces of a certain colour from the next group of a different colour which will be painted after the nozzles will have been rinsed: a “factory within a factory”, with no need for manual intervention.

Painting work cycles include a primer layer, an undercoat and two finishing coats, all separated by hot air drying and sanding of the undercoats. It should be noted that sanding is wisely and expertly separated from the painting operation; the result is a contamination-free, smooth as silk finished product.

Never-resting Ilar: Currently being prepared is an extraordinary vacuuming system that removes paint overspray (non-soluble particulates, existing also in water-based paints) and sanding dust. A sleeve-based system that vacuums the air in the entire building, treated as one big booth, filters it and discharges the contaminants outside.

Another great innovation, not required by the Environmental Protection Authority (Ilar operates in full conformance with current laws and standards), but required by Ghilardi's irrepressible desire to be a true model. The size of investment will once again be considerable, but we, who have twice witnessed the results of the company's investments, have not the slightest doubt that also this time the return on such investment shall at least equal it, or more likely surpass it.

We deliberately wanted to tell the Ghilardis’ business story – past, present and future – because we believe that our readers would be best served by seeing up close systems of excellence, such as the robot that is described here, but also learning from the experience of companies that operate with a positive balance and serve as true monitors of what is called the “crisis” scenario, which has often been viewed and is still viewed as a condition of laxness and indecision, admittedly caused by real circumstances at times, but often accepted as an “epidemic”, as an excuse to “not doing”. Here is the whole point: Ilar Verniciature is “doing”.

Ilar Verniciature (Italy)

Informatie aanvragen

Vul het online formulier in om contact op te nemen met een productadviseur

 

Verwerking van persoonsgegevens in overeenstemming met wetsdecreet 196/03 en AVG 679/2016 en de toepasselijke wetgeving
AVG* Autorisatie/strong
Ik geef hierbij toestemming dat mijn persoonlijke gegevens worden verwerkt volgens het AVG-privacybeleid.

Marketing Autorisatie
Ik stem er hierbij mee in dat mijn persoonlijke gegevens worden verwerkt voor marketingdoeleinden in overeenstemming met het privacybeleid.

Autorisatie aan derden
Ik geef hierbij toestemming voor het doorgeven van mijn persoonsgegevens aan derden, inclusief bedrijven in de groep en/of externe derden buiten de groep, zoals branche-exploitanten voor hun marketingdoeleinden.

* bij het ontbreken van deze autorisatie kunnen wij uw verzoek niet in behandeling nemen.

Related products

Finishing Lines for Windows Robot Maestro - SCM Group

robot maestro

Inspired by the craftsman's arm movements and transformed into a six-axes anthropomorphic robot with the possibility of extension to eleven. A new quality and efficient finishing method for painting windows frames and doors.