Fratelli Minotti

Furniture Technologies

 

The edgebanding specialists

At Fratelli Minotti every design request and requirement is made possible thanks to the individual skills and SCM technology. The company, located in the heart of the Brianza, works as a subcontractor for the most important furniture factories. Entering the premises one has the impression of being in a showroom, where three generations of SCM edgebanding machines operate at the same time. The new Morbidelli Author M600 work centre allows other types of machining operations and new orders.

The Minotti brothers and their company represent the essence of the active Brianza and its values, that have made this land one of Europe’s leading districts of production excellence.

The family, the correctness, the commitment, the work (a lot of it), the trust in individual capacities, the sobriety of the approach and the technology are the distinctive traits of this, as well as other companies, in this area.

As far as the Minottis are concerned, it all began in 1973 when Luigi and Virginio decided to accept the inheritance of their father Giuseppe, a very talented cutter, and started their business dedicating themselves to edgebanding in particular.

The years after the post war economic boom maintained the euphoria of a country that had picked itself up from its feet, despite showing the first signs of difficulty and social tension. The Brianza furniture factories produced high quality furniture that was very successful in Italy and Europe. The companies worked at full capacity and there was a need for subcontractors specialised in specific machining operations and the Minotti brothers soon made a name for themselves for edgebanding.

In 1976 the Minottis carried out the first shaping work, which was then followed by softforming, of which they have become undisputed masters. From that moment onwards the company established itself as one of the leading edgebanding sub-contractors for the largest companies in the sector.

Fratelli Minotti currently employs ten people. The presence of the family is fundamental: the owners Luigi and Virginio and their sons Stefano and Davide. 

For the new generation of the family the responsibilities are constantly increasing and they are responsible for the management of the new sophisticated machines that make extensive use of electronics.

 

Fratelli Minotti is fully part of the Brianza production process. The main customers, located in an ideal radius of 10 kilometres, are proud representatives of made in Italy furniture that continues to represent the pinnacle of the global furniture sector.

For the Minotti brothers trust and reliability are not taken for granted, but are tangible values that must be measured and tested every day. Naturally this led to a stable and long-term relationship with SCM.

The Cabiate plant is a sort of showroom for the latest SCM solutions and at the same time a functional museum of the group’s technologies. Updating the machines is fundamental for the Minottis, but if a machine is still operating well, it continues to be fully integrated in the production process. Visiting the company is therefore fascinating because one can see thirty year old machines next to the latest work centres and edgebanders.

The Minotti brothers have made a name for themselves with wooden edgebanding, but the production includes ABS, PVC and melamine materials. The company produces furniture parts requested by its clients, who then assemble them or they proceed with other machining operations in order to deliver the finished product.

The company also uses two cells that have the same composition, even though they belong to two different generations. The first and most recent is a Celaschi squaring unit that machines the panel to the desired measurement. This is followed by the Stefani Monomatic edgebander, which takes care of the heavy-duty work. These machines are a testament to the reliability of SCM equipment; the years pass and they remain perfectly operational. The unloading is taken care by an automated storage system that prepares the panel, edgebanded one side at the time, for the subsequent passages.

The other cell is rather unique as it includes a “tipo 280” Celaschi and an Olympic System, both thirty year old “grande dames”, but still operational. As Virgilio Minotti explains: “For certain very particular machining operations we prefer using the Olimpic, which becomes a sort of assistant for the manual work”.  

As far as the work centres are concerned the jewel in the crown at Fratelli Minotti is the latest Morbidelli Author M 600 (since May 2017 “Morbidelli m600”), complete with all the optionals, that allows the company to meet the customers’ requirements also for other operations. Any type of drilling and routing is possible, to complete high quality elements. In this case it’s the other young Minotti, Davide, who looks after the new Morbidelli, where the lion’s share of the work is carried out on the graphic interface and the Maestro software, which can easily be programmed for any type of machining operation. Thanks to this work centre the Minottis are able to fulfil orders for extremely specific productions, where all the machining operations and the furniture parts are produced entirely in-house at the Cabiate plant and often even partially assembled.  

Virginio’s words sum up Minotti’s experience: “Our work is based on technology and the personal skills of each one of us. Our machining operations are so cutting edge that we must continuously invest in equipment that allows us to respond to the precise requests of every customer. This is why we have chosen SCM solutions over the years. Their machines can adapt to our highly flexible production and are guaranteed by an extremely professional technical support”. 

Fratelli Minotti (Italy)

Furniture components manufacturer

www.flliminotti.com

Informatie aanvragen

Vul het online formulier in om contact op te nemen met een productadviseur

 

Verwerking van persoonsgegevens in overeenstemming met wetsdecreet 196/03 en AVG 679/2016 en de toepasselijke wetgeving
AVG* Autorisatie/strong
Ik geef hierbij toestemming dat mijn persoonlijke gegevens worden verwerkt volgens het AVG-privacybeleid.

Marketing Autorisatie
Ik stem er hierbij mee in dat mijn persoonlijke gegevens worden verwerkt voor marketingdoeleinden in overeenstemming met het privacybeleid.

Autorisatie aan derden
Ik geef hierbij toestemming voor het doorgeven van mijn persoonsgegevens aan derden, inclusief bedrijven in de groep en/of externe derden buiten de groep, zoals branche-exploitanten voor hun marketingdoeleinden.

* bij het ontbreken van deze autorisatie kunnen wij uw verzoek niet in behandeling nemen.

products-related-products

Machining Centre Morbidelli M600/800 - SCM Group

morbidelli m600/800

Morbidelli m 600/800 Modulaire bewerkingscentra, ontworpen en ontwikkeld om te voldoen aan de eisen van meubelfabrikanten. Prestaties zonder vergelijking met de mobiele portaalconstructie en eenvoudige programmering van alle productieprocessen door...

Single-Sided Edge Bander Stefani S - SCM Group

stefani s

De stefani s kantenaanlijmmachine is ontworpen voor middelgrote en grote bedrijven. De machine staat bekend om zijn nauwkeurige bewerkingen, betrouwbaarheid en efficiency. Het is een leider in de markt en geschikt voor het bewerken van kanten met plastic...

Fiber Cement Squaring Machine Celaschi P60 - SCM Group

celaschi p60

Thanks to the consolidated experience and continuous development, celaschi p60 is double-end tenoner customizable according to specific needs. Its reliable mechanics, motors power and electronic management of the different devices make celaschi p60...