balestrini pico ff

(512) 931-1962
Tenoners and mortisers - Tenoners-mortisers - balestrini pico ff

CNC Tenoning-mortising two-faced machine

Dedicated to the execution of “Miter Door” and “Face Frame” joints for the production of frames and shuttered doors in solid wood or melamine-coated MDF, with assembly with no need of dowels.

Thanks to its unique design, the machine has two worktables always ready to use, to switch easily from top machining to longitudinal one.

Advantages

POWER AND ERGONOMICS 

The 4.5 kW tenoning unit and the 2 kW mortising unit make it possible to produce tenons and mortises with a reduced number of passes. The tenoning and mortising depth is adjusted in the parking area, which is also used for tool maintenance.

TWO MACHINES IN ONE

Top and longitudinal machining operations are carried out on different work stations but on the same machine, thus expanding the applications and reducing overall dimensions.

The control panel placed on a mobile support follows the operator to the work station.

SAFETY AND CLEANLINESS

The full enclosure of the machine ensures protection without reducing its ease-of-use, and keeps the outside environment clean.

The side suction outlets allow to convey shavings and dust towards the extraction system.

MAESTRO ACTIVE JOINT

It is the new Human-Machine Interface with an extremely simple and effective design, which allows to select numerous macros for Miter Door joint, tenons, holes and multiple mortises programming.

Technical data
MACHINING FEATURES FOR FRONT WORKTABLES
Workpiece cross-section (widthxthickness) Min. 38 x 18 mm
Max. with 45° cut 102 x 28 mm 
Max. with 0° cut 150 x 28 mm 
Workpiece length Min.  100 mm
Max. Not applicable
Tenon dimensions Length max. 150 mm
Thickness max. 12,7 mm (1/2")
Height 8 ÷ 26 mm
Hole or mortise dimensions Hole diameter 3 ÷ 16 mm (possible interpolation up to 26 mm)
Mortise length max. 150 mm
Mortise thickness 3 ÷ 16 mm (possible interpolation up to 26 mm)
Hole or mortise depth max. 12,7 mm (1/2")
"Miter Door" work cycle time min. 18s (50 frames for cabinet doors/hour)
MACHINING FEATURES FOR REAR WORKTABLE
Worpiece cross-section (widthxthickness) Min. 38 x 18 mm
Max. 150 x 50 mm
Loadable workpiece length Min. with 2 pressure cylinders 220 mm
Max.

1250 mm (STD)

1370 mm (OPT)

Machinable workpiece length Min. with 2 pressure cylinders 220 mm
Max. 1100 mm
Hole or mortise dimensions Hole diameter max. 16 mm (doubling by interpolation)
Mortise length max. 960 mm
Mortise thickness 3 ÷ 16 mm (doubling by interpolation)
Hole or mortise depth max. 50 mm
Holes centre-distance max. (in X axis) 960 mm

 

media
Documentation
Request information

Fill out the online form to be contacted by a salesperson

 

gdpr::wood-privacy_a

gdpr::wood-privacy_b

gdpr::wood-privacy_c

form-disclaimer