minimax fs 41e
(512) 931-1962
Surfacing-thicknessing machine for the demanding craftsmen and carpentries, for a high-flexible production with an “elite” finishing.
Discover the "Xylent" cutterhead, available for this machine.
Perfect finishing
The planer unit stands on cast iron supports and the standard version has a 87 mm diameter cutter block with 3 knives. (The optional “Tersa” cutter block is available with 4 quick tightening knives and automatic adjustment). For an impeccable finish, the pressureof the thicknesser feed rollers can be adjusted according to the type of wood machined. The infeed roller has a helicoidal profile to guarantee firm and constant work piece feed, while the outfeed roller, in sandblasted steel, maintains the perfect post-processing finishing.
Planing fence
The fs 41e uses a dedicated planing fence extremely rigid and smooth, thanks to a support with central round bar.
“Xylent” spiralknife cutter block with 3 series of knives
The 3 spiralknives give an exceptional finish. Reduced noise during machining provides a more comfortable working environment. It also improves the dust extraction due to the production of very small chips. Each cutter has 4 tips which can be rotated into the cutting position when worn. Therefore increasing the production life of the cutter block before knives require replacement.
| fs 41e | ||
| Cutterhead working width | mm / inches | 410 / 16 |
| With TERSA Straight-knife Cutterhead: Cutterblock diameter / no° of standard knives Dimension of standard knives |
mm / n° mm |
87 / 3 410 x 30 x 3 |
| With XYLENT Spiral helical Cutterhead: Cutterblock diameter / no° of standard knives Dimension of standard knives |
mm / n° mm |
87 / 66 15 x 15 x 2.5 |
| Max. stock removal | mm | 5 |
| Jointer table length | mm / inches | 2200 / 79 |
| Planer table dimensions | mm / inches | 410 x 775 / 16 x 30.5 |
| Planer feed speeds | m/min | 6 / 12 |
| Min. - max. planer working height | mm / inches | 3 - 230 / 0.12 - 9 |
| Single-phase motor | Hp | 4.8 |
| Fence Tilt | degrees | 0 - 45 |
"Xylent" cutterhead
Fill out the online form to be contacted by a salesperson