tecnocut e-pump
(512) 931-1962
HYBRID INTENSIFIER
TECNOCUT E-PUMP is the latest innovation in the range of CMS Plastic Technology intensifiers created as a continuation of the quest by CMS for efficiency, performance, energy consumption and low environmental impact in the world of pressure intensifiers for waterjet cutting applications.This new project was carried out entirely in the CMS engineering department and has given rise to an innovative product that combines the power density of a hydraulic pump with the energy efficiency of a direct-drive mechanical architecture. The simplicity of the system translates into a significant reduction in components: up to 95% compared to a conventional hydraulic intensifier.
Tecnocut e-pump exploits an electrohydrostatic unit connected directly to long-stroke pressure multiplier cylinders, achieving an operating
efficiency of more than 31% compared to hydraulic intensifiers. The intensifier has an on-board intelligence with portable tablet (Wi-Fi) and touch display for monitoring and controlling operating parameters and performing diagnostics on hydraulic and high-pressure components.
Tecnocut e-pump can be installed on any cutting table, even third-party ones.
CONSTANT OUTPUT PRESSURE FOR BETTER CUTTING QUALITY
Hydraulic intensifier with 2 or 3 independent and electronically syncronized parallel cylinders to guarantee a constant signal of output pressure without the use of attenuator.
LESS MAINTENANCE COSTS
The parallel cylinders architecture is designed for a low cycle frequency that reduce the high pressure components wear and consequently the maintenance costs.
"NOISELESS" SYSTEM FOR A QUIET ENVIRONMENT
Sealed cover with soundproof panels to guarantee high noise reduction while the intensifier is working.
REMOTE MANAGEMENT
The intensifier web interface is accessible remotely via computer or smartphone to view operation, see any alarms and activate the emergency STOP command when necessary.
| TECHNICAL SPECIFICATIONS * | |
| POWER CONSUMPTION (0.38 ORIFICE AT 3800 BAR) | 30 kW |
| MAXIMUM POWER CONSUMPTION WITH CLOSED HEAD | 2.4 kW |
| MAXIMUM OPERATING PRESSURE | 4130 bar |
| MAXIMUM WATER FLOW RATE AT 3700 BAR | 5 l/min |
| MAXIMUM ORIFICE DIAMETER AT 3700 BAR | 0.40 mm |
| OVERALL DIMENSIONS L X W X H | 1666x906x1529 mm |
| WEIGHT | 1400 Kg |
| VOLTAGE (THREE-PHASE) | 400 V 50/60 Hz |
| OIL TANK CAPACITY | 13 L |
| PRESSURE ATTENUATOR CAPACITY | 1.15 L |
| CYLINDER STROKE | 200 mm |
| REQUIRED INLET WATER TEMPERATURE (ACCEPTABLE MIN – MAX) | 5 - 25 °C |
| NOMINAL ENVIRONMENT TEMPERATURE (ACCEPTABLE MIN – MAX) | 5 - 40 °C |
| NOMINAL NOISE | 70 db |
* BFT Technology. The technical data may vary with different configurations
Fill out the online form to be contacted by a salesperson