e-pump
(512) 931-1962
HYBRID INTENSIFIER
E-PUMP is the latest innovation in the range of CMS Glass Technology intensifiers created as a continuation of the quest by CMS for efficiency, performance, energy consumption and low environmental impact in the world of pressure intensifiers for waterjet cutting applications.
This new project was carried out entirely in the CMS engineering department and has given rise to an innovative product that combines the power density of a hydraulic pump with the energy efficiency of a direct-drive mechanical architecture.
The simplicity of the system translates into a significant reduction in components: up to 95% compared to a conventional hydraulic intensifier. Tecnocut e-pump exploits an electrohydrostatic unit connected directly to long-stroke pressure multiplier cylinders, achieving an operating efficiency of more than 31% compared to hydraulic intensifiers. The intensifier has an on-board intelligence with portable tablet (Wi-Fi) and touch display for monitoring and controlling operating parameters and performing diagnostics on hydraulic and high-pressure components.
Tecnocut e-pump can be installed on any cutting table, even third-party ones.
PRESSION DE SORTIE CONSTANTE POUR AMÉLIORER LA QUALITÉ DE LA DÉCOUPE
Intensificateur jusqu’à 3 cylindres parallèles indépendants et synchronisés électroniquement afin de garantir un signal de pression de sortie constant sans besoin d’accumulateur de pression.
RÉDUCTION DES COÛTS D’ENTRETIEN
L'architecture à cylindres parallèles permet de réduire le nombre de cycles de pompage et, par conséquent, l’usure des composants haute pression et les interventions d’entretien.
SYSTÈME "NOISELESS" POUR UN MILIEU DE TRAVAIL SILENCIEUX
Fermeture scellée avec des panneaux insonorisés afin de garantir le plus grand silence durant le fonctionnement de l’intensificateur.
REMOTE MANAGEMENT
The intensifier web interface is accessible remotely via computer or smartphone to view operation, see any alarms and activate the emergency
STOP command when necessary.
| TECHNICAL SPECIFICATIONS * | |
| POWER CONSUMPTION (0.38 ORIFICE AT 3800 BAR) | 30 kW |
| MAXIMUM POWER CONSUMPTION WITH CLOSED HEAD | 2.4 kW |
| MAXIMUM OPERATING PRESSURE | 4130 bar |
| MAXIMUM WATER FLOW RATE AT 3700 BAR | 5 l/min |
| MAXIMUM ORIFICE DIAMETER AT 3700 BAR | 0.40 mm |
| OVERALL DIMENSIONS L X W X H | 1666x906x1529 mm |
| WEIGHT | 1400 Kg |
| VOLTAGE (THREE-PHASE) | 400 V 50/60 Hz |
| OIL TANK CAPACITY | 13 L |
| PRESSURE ATTENUATOR CAPACITY | 1.15 L |
| CYLINDER STROKE | 200 mm |
| REQUIRED INLET WATER TEMPERATURE (ACCEPTABLE MIN – MAX) | 5 - 25 °C |
| NOMINAL ENVIRONMENT TEMPERATURE (ACCEPTABLE MIN – MAX) | 5 - 40 °C |
| NOMINAL NOISE | 70 db |
* BFT Technology. The technical data may vary with different configurations
Remplissez le formulaire pour recevoir de plus amples informations