平压刨机
SCM细木工机床是持续内部开发的成果，补充了Minimax加入SCM后所获得的卓越技能和专有技术。该品牌拥有丰富的传统，如今已成为一个型号名称。Formula产品系列通过精选的合作伙伴网络制造而成，由SCM提供充分保证。
平压刨机用于逐步减小木条的厚度，从而获得尺寸相同、即可进行组装的工件。
但是，必须预先制备好木材：首先必须使用平刨机对四面中的两面进行平刨加工，以确保木板在放置时完全搁在滑台上；移动上面部分，工件每个点处的最终高度均相同。
根据木材平刨机的功率逐渐进行减小。可以进行调整，使材料移动十分之几部分（以毫米为单位）。显然，如果有多个工件，则将平刨机调整至较小的尺寸前，必须使所有的工件都具有相同的尺寸。
使用木材平压刨机时的一个重要方面是沿纹理方向插入木材，以防止纤维磨损。
Thicknessing planers are used to progressively reduce the thickness of a wooden strip, to obtain pieces with identical dimensions ready for assembly.
However the wood must be previously prepared: two of the four sides must firstly be planed with a surface planer so that when the board is positioned it rests perfectly on the sliding table; removing the upper part, the final heights will be the same on each point of the piece.
The reduction is performed gradually based on the power of the wood thicknessing planer. It can be adjusted to remove a few tenths of material up to various millimetres. Obviously if there are many pieces, they must all be brought to the same measurement, before adjusting the planer to a lower measurement.
One important aspect when using the wood thicknessing planer is to insert the wood in the direction of the grain to prevent the fibres from fraying.
