全自动封边机stefani az
(512) 931-1962
采用"批量1"加工模式的新型封边单元是基于技术解决方案、投资水平和回报的stefani az产品的一部分。此单元属于家具制造业内的全面创新，这个行业对灵活、多样化、高附加值的生产方式日益敏感。
U-shaped lay out of the line
Thanks to the U-shaped lay of the edgebanders and the conveyor, the processing line is very compact thus allowing to optimize the required production space.
EdgeStore Manager
The automatic learning system via barcode or QRcode reader combines the program to be executed with the correct edge for extremely simple and fast management of the edge coil change. Thanks to the dedicated interface of the Maestro active edge software, all edge information (name, color, thickness, consumption, etc.) are always available on a single screen.
BN+ infeed device
The correct panel infeed is essential to comply with the shape and final size of the component.
This is possible thanks to the automatic infeed device by belts with dynamic movement of dogs for longitudinal insertion in the 1st passage and transversal insertion in the 2nd passage. Suitable for panels already squared or to be sized and squared.
"TR C180" conveyor
Thanks to this dedicated handling system, the two edgebanding machines can also be used as stand-alone single-sided machines with independent panel introduction.
|
采用纵向输送时的可加工尺寸 （长x宽） |
mm
|
最小250x130 min
最小3000x1200 max
|
|
采用横向输送时的可加工尺寸 （长x宽） |
mm
|
最小130x250 min
最小1200x3000 max |
|
所需空间
|
m^2
|
约200
|
|
操作人员数
|
|
1
|
|
生产力（操作人员的装载能力 及所需加工的可变性函数） |
mm
|
800-1000
|
|
板材磨边加工操作
|
|
是
|
|
上胶加工操作
|
|
是
|
|
对生产进行定性检查的可能性
|
|
是
|
|
采用SIDE FINDER技术用于智能识别 需插入侧 |
|
是
|
|
对每一种构件进行加工可行性分析
|
|
是
|
|
通过定时检查进行初步过程模拟
|
|
是
|
联系我们
Fill out the online form to be contacted by a salesperson
Thank you Your message has been sent.
Error! Something wrong has happened